The first thing we did was to make sure we didn’t have any electrical in the main soffit. If it's empty, there is little difficulty in removing it.
If there is an attic above you could install the insulation from above after the sheetrock is installed.
Diy kitchen soffit removal. Removing gutters can be a real drag, but they may be reusable—if they survive the removal intact and if the color matches the new trim. Diy kitchen soffit removal guide hollister residents can use you will need several tools and a few supplies to tear down the soffit. Some kitchen soffits contain electrical wiring and serve as a great concealment.
If it is full of pipes or duct work, the difficulty. We cut an opening in the end and shined a flashlight to check. Trace the seams and mark along the length with a chalk.
By removing the drywall, we could see the skeleton of the soffit and any obstacles that needed to be avoided when using the reciprocating saw. But this presents a really big safety hazard. Kitchen cabinet soffit design, kitchen soffit lighting, kitchen soffit crown molding, kitchen soffit trim ideas, kitchen cabinet soffit crown molding, kitchen soffit over island, kitchen soffits makeovers, kitchen soffit painting ideas, kitchen soffit decor, kitchen soffit remodeling ideas, kitchen soffit decorating, kitchen cabinets with soffit above, kitchen ceiling soffit, white kitchens.
Go to the main electrical panel and find the breaker powering the wiring inside the soffit. Take off the cove molding along the soffit with a pry bar. Slide the end of the pry bar between the top of an aluminum soffit panel and the bottom of the fascia board.
I want to diy demolish the existing 12 soffit above the cabinets, then hire a plumber/electrician to adjust the wiring/pipes, then hire a contractor to reframe/drywall a new 6 soffit. If you choose to remove your soffit, cut a hole in the side and look in there first. Then, you can follow these helpful diy kitchen steps:
Unscrew the cabinet unit from the soffit and remove the cabinets. Ensure all nails are removed from the panel. Once you’ve cut through all the seams, you can extract the soffit with a pry bar.
Diy kitchen soffit removal steps dispatch junk kitchen with drop ceiling soffit lights gbc and bath kitchen cabinet soffit design heser vtngcf org to paint or not the soffit how do i make soffits tops go up to top of cathedral vaulted ceiling height kitchen cabinets awesome or awful byhyu 177 kitchen remodel removing cabinets and soffits. Plus, the weight of the soffit is drastically reduced without that extra weight. Cover the counter and floor.
Here’s how to do a kitchen soffit removal: Cut into the crease along the ceiling. This will allow me to install 36 cabinets versus the dated 30 cabinets i currently have.
Before removing the soffit, make sure your future installation matches the room. A dumpster usually rents for approximately $200. The first soffit that we worked on was clear of electrical.
Cut into the crease along the ceiling. The insulation and drywall soffit were the only barrier between the great outdoors and our kitchen. This may be a good time to add additional insulation to the whole attic.
I could see light streaming in through the back side of the gable vent i'd converted to a hatch above. You can then cut through the caulking with a sharp razor knife. Step 1 will be to fix all the walls.
This includes anything on the countertops, and even the microwave, if it’s not mounted. Cover them with drop cloths. It is easier to begin work at the seams.
If not you could staple the paper face to the studs. Our plan of attack involved cutting through the vertical 2×4 studs. Before beginning the removal process, break several holes within the surrounding drywall and inspect the area.
Unscrew the cabinet unit from the soffit and remove the cabinets. Next, you use a ladder to position yourself right by the soffit itself. A kitchen soffit can’t always be removed, but can often be disguised or covered up in ways that allow the soffit to blend in with the overall look of the kitchen.
If you plan to use a wood painted soffit to close that space up and put the crown molding, which makes no sense doing all that work, because you can put crown molding on top of the existing soffit and have the same effect. This allowed us to actually see where the nails were holding the soffit in. Cut in additional soffit venting where necessary and remove existing soffit grilles to improve airflow.
If you cut the batt insulation so it is a tight fit it should stay in place. The kitchen should be empty and covered in plastic and/or drop cloths. Take off the cove molding along the soffit with a pry bar.
Begin the job by pulling off the gutters. And, be sure to remove anything that’s hanging or stored underneath the soffit. In most cases, a finish is applied over the seams to give the soffits a uniform appearance.
As expected my plan to tile the kitchen floor has morphed into a complete kitchen remodel. I am entertaining the idea of removing the kitchen soffits. Next, you use a ladder to position yourself right by the soffit itself.
Clear out the kitchen and cover everything. The very first thing you need to do is protect the kitchen counter and floor. Throw away or donate the old cabinet doors, molding and hardware.
Now you have to patch sheetrock and make a nice finish if you plan to keep that space open. Next step, was to pry the drywall off the front of the wood. Kitchen soffits sometimes known as bulkheads can be difficult to deal with if they are creating too much of a protrusion in your home.
That access hatch is going to make running the electrical up there a lot easier. Throw away the old cabinet doors, molding, old hinges, etc. Pull down to release the nails from the bottom of the board.
See more ideas about kitchen remodel, kitchen soffit, kitchen design.