Don't forget to turn off the water to your kitchen faucet! Remove the plastic tool and use the plier to firmly grasp the top of the cartridge stem and pull straight up to lift the cartridge out of the faucet body.
You may now disconnect the hoses connected to the water supply lines to the handle and cartridge with an adjustable wrench.
Remove kitchen faucet cartridge. Keep in mind that there are also hoses connected to the spout and sprayer to the faucet diverter. Watch the 1224 cartridge removal & installation video. Locate the aerator at the end of the faucet spout and notice where they connect.
The cap and bonnet hold the cartridge in place and will next need to be removed. To replace the cartridge, grip the top of the cartridge with pliers and pull straight up to remove it. Some faucets do not have caps;
To do this you have to unscrew the nuts on the supply tubes. It might make your job easier as well. It is possible that you have to remove the entire valve assembly from the faucet first, because even when you crack it loose that cartridge might not come out of the top like you are planning;
Use a paper towel to sop up any water remaining in the valve body and check for remnants of gasket or other things that would interfere with replacement. The screw is not visible because it is covered by a cap. Just follow the installation instructions in reverse.
Flat blade screwdriver or a utility knife; Most moen faucets have a cartridge inside that controls the flow of water as it turns. Please note that your cartridge may have an imbedded cartridge nut that is not shown on the video.
Removing the old kitchen faucet cartridge. As you thread the tap wrench back down into the cartridge shell (#2), it will hit the dowel forcing it to the bottom causing the cartridge shell (#2) to reverse out. Find the mounting nuts that secures the faucet to the sink.
You better keep a water bucket just underneath. Wrap several layers of painter's tape around the aerator to protect the finish from the pliers during its removal. If your faucet has a cartridge, unscrew the top piece of the faucet.
Hopefully, the one you are dealing with is capped. Your faucet cartridge may look different than the one we have here, but the steps for cleaning them are essentially the same. If there is no cartridge, you already reached the actual faucet from which the water comes.
You could also opt to get a new valve assembly if you really can't budge that cartridge. Drop the hardwood dowel into the cartridge shell (#2). The faucet guide will contain specific information on handle assemblies associated with that style of product.
Replace all rings with the matching size. If the installation year for the faucet is unknown, it may be necessary to remove the handle before you begin. If yours has a cap, then this step is essential.
Turn off the water supply valve under the sink. Now disconnect the supply lines by moving the counter underneath, which is the area that is connected to handle and the cartridge. You’ll may also need a screwdriver and a utility knife or putty knife to remove any old caulk from around the faucet.
For additional details on removing the handle, visit solutions.moen.com and select the type of faucet you are working on. Unscrew the nuts and disconnect the water supply lines. Now loosen the cartridge assembly with your wrench and remove it.
Place the plastic bowl upside down over the faucet hole to direct water spray towards the drain. Pry off the cap by using a flat head screwdriver. Then, loosen and remove the nut from the cartridge using pliers.
Using a philips screwdriver, unscrew the handle screws and pull the handles off from the faucet assembly. The chart below gives details to help identify which cartridge your faucet uses. How to remove the flow restrictor on the moen magnetix.
You’ll use it to remove the different nuts that are involved in a faucet removal. This is usually a simple twist and turn movement, which is an easy way to remove the sprayer head. How do you remove the cartridge from a glacier bay kitchen faucet?
You may not be able to find the cap at the base of the faucet but the side. I've removed everything that is supposed to come apart up to this point, including the retaining clip that holds the cartridge in. It is worth noting that some kitchen faucets don’t come with caps.
Likewise, how long do moen cartridges last? After shutting off the water supply to your faucet, the next step is to remove its cap. If you have an extra pair of hands to help you, now would be a good time to put them to use.
Moen sent a replacement cartridge (1225 b), that includes a removal tool. Unscrew the retaining ring by turning it counterclockwise with a crescent wrench. You will be able to collect the water, which might leak along the way, as there might be some leakage at this point.
Using an adjustable wrench or pliers, grab the square top of the plastic tool and twist the cartridge back and forth in its housing to loosen the cartridge. This prevents it from turning as you unscrew the tube nut. Remove the cap on top of your faucet.
Faucet cartridge | 8 easy steps for a quick leaky faucet repair faucet cartridge repair materials: The handle is secured into the faucet’s stem by use of a screw. You can remove the water limiter in a grohe kitchen faucet using a common household tool in about 10 minutes.
On some models of faucet you may have to remove the cartridge with a specialized tool, which will be indicated on manufacturer’s instructions. Slide the white cartridge removal tool that came with your new cartridge over the old cartridge.the tool acts a socket for the cartridge so you can use a wrench to remove it. You will first need to remove the handle by removing the set screw and then lifting out the handle.
Use an adjustable wrench to grab the tool and twist the cartridge back and forth until it works loose. Now to remove the handle of the faucet first thing you need to do is to remove off the cap from it. The basin wrench is designed to work in tight spaces.
If not, use an old towel and wrap it around the faucet to avoid scratching. Refer to the documentation that came with your faucet. In this case, you start with removing the faucet handle.